How to apply for Canadian SOR/2011-17 certification for children's early childho
Date：2025-10-15 10:05:08 Classification
：【question】 Visits：
The Toys Regulations (SOR/2011-17) under the Canadian Consumer Product Safety Act (CCPSA) specify mechanical and physical properties, flammability, chemical properties, electrical properties, and labeling requirements for toys. The complete process and core requirements for obtaining a Canadian SOR/2011-17 certification report for early childhood education devices are based on the Canadian Consumer Product Safety Act (CCPSA) and related regulations:
I. Confirmation of Certification Applicability
1. Mandatory Scope
- Early childhood education devices designed or indicated for children aged 14 and under (including voice interaction, music playback, and other functions) must comply with the core standards of SOR/2011-17 and the following related regulations:
- SOR/2016-188 (Phthalates Limits)
- SOR/2016-193 (Surface Coating Lead/Mercury Content ≤ 90mg/kg)
- SOR/2018-83 (Limitation of Lead-Containing Components)
II. Certification Process
Step 1: Select a Testing Laboratory
- An ISO 17025-accredited laboratory (e.g., a CPSC-authorized laboratory) is required to ensure the validity of the test report.
- Provide the laboratory's accreditation number (e.g., Dezewei CPC number: 1552) for Amazon's review.
Step 2: Prepare Materials and Samples
- Documents:
- Product instructions, circuit diagram, bill of materials (including plastic/coating/battery types)
- Bilingual label design (English and French, including age rating and warnings)
- Manufacturer and importer information (Canadian address must be specific to the city)
- Physical samples:
- Provide 3-5 unopened samples of the same model.
Step 3: Test Item List
| Test Category | Specific Items
| Physical and Mechanical Properties | Risk of Small Parts Falling Off, Sharp Edge Test, Structural Stability (Drop/Torque Test)
| Chemical Safety | Phthalates (DEHP/DBP/BBP ≤ 1000 mg/kg), Lead/Cadmium Migration, Heavy Metals in Surface Coatings
| Electrical Safety | Battery Compartment Anti-Tampering (ANSI/UL 4200A), Voltage ≤ 24V, Overheating Protection
| Acoustic Safety | Volume ≤ 85 dB (measured 25 cm from the source)
| Labeling and Packaging | Soft Film Bag Thickness ≥ 0.019 mm (when opening circumference is less than 35.3 cm), Suffocation Warning Label
Step 4: Submit Test and Report Review
- Test Cycle: 5-7 working days (If unsatisfactory, revisions and retesting are required).
- The report must include:
- Product model, batch number, and production date
- Intended age range (must match the product listing)
- Laboratory signature and test date.
Step 5: Amazon platform submission
- Backend requirements:
- ASIN list, actual product images (including safety warning labels)
- Original PDF copy of the test report.
III. Common Failure Causes and Mitigations
| Risk Points | Solutions
| Missing French label | Label must include bilingual English and French warnings (e.g., "⚠️ Choking Hazard")
| Battery compartment can be opened by children | Reinforced battery compartment structure, pass 20N tensile test
| Phthalates exceeding the limit | Avoid using PVC materials; replace with TPE/silicone
| Report does not include importer information | Provide the name and address of the Canadian importer
IV. Special Considerations
1. Combination Products:
- If the early childhood education device contains detachable components (such as toy pendants), the safety of these small components must be tested separately.
2. Risk of Mislabeling Ages:
Even if a product isn't labeled as under 14 years old, its cartoon design or features may still qualify it as a children's product and require mandatory certification.
Shen Gongwang Security: 44030602006947